Tips & Tricks - Ensuring A Flawless New Shower Unit Installation

Automated Marketing



We've unearthed this article on How to Install a Freestand below on the net and believe it made perfect sense to relate it with you here.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installment calls for careful planning and also a lot of job. Most of the times, you will certainly require to do 3 kinds of tasks: framing wall surfaces, mounting the plumbing, and also finishing walls.

Prep work


First of all, you must select the kind of shower that you want to install. It is important to determine whether the selected shower is capable of coping with particular systems and can manage a risk-free level of water through the boiler. The majority of shower systems nowadays are developed to be versatile to different water stress (such as kept hot water as well as chilly mains).
It is also essential to take into account the water stress and also the preparation of the piping and also drain for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be connected to the bathroom tap based on your need, and also the water temperature can be adjusted via the faucets. Push-on mixers are cheap and also exceptionally basic to set up. Nevertheless, although the hose connection is straightforward, it is quickly dislodged. Additionally, it is inconvenient to readjust the temperature level.

  • Bath/Shower Mixer: The pipe as well as spray of this kind of shower are combined with a bathroom mixer faucet, and the temperature can be readjusted with the bath faucets. It is a really economical choice and no additional plumbing is included. However, the bath/shower mixers also deal with troublesome temperature control options.

  • Guidebook Mixer: The hose pipe as well as spray of a manual mixer shower system are a part of the wall device as well as the hot and cold water products are linked to a single shutoff The temperature and stress of the water are managed through either one or a selection of handles (in much more expensive showers). Although temperature control is much easier in hand-operated mixer types, they are extra expensive than the formerly pointed out mixers. They likewise call for extra plumbing of cold and hot water system pipelines.

  • Thermostatic Mixer: The hose and spray of this shower kind belong of the wall device as well as the cold and hot water supplies are attached to a single shutoff here also. It is total with an integrated stabiliser to self-adjust the water temperature and also to avoid it from becoming as well hot. Among the most significant benefits of a thermostatic mixer shower type consists of practical temperature level control. Nevertheless, it is one of the most expensive of the various mixer choices.

  • Power Shower: A power shower is a single device having a powerful electrical pump that is capable of modifying both the water pressure and also temperature. This kind of shower can be fitted if there is water supply from a cold water tank and a hot water cyndrical tube. A power shower makes the change of both stress and also temperature easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a combination boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats up the water electrically. It is important to keep in mind that for this shower type to be set up, the keys stress needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature level and pressure to be readjusted using a knob. Models with temperature stabilisers are better as they stay untouched by various other faucets in other places in use within the home. A major drawback of electric showers is that the control handle only permits the alternative of high temperatures at less pressure, or lower temperatures at a higher stress. This is bothersome in the winter season when the spray is usually weak and the mains water is chillier. Nevertheless, this issue is dealt with in some versions which are readily available with a winter/summer setup.


  • Approach


    Relying on the type of shower you desire to mount, the shower head must either be suited order to prevent its contact with the water in the bath below or the base tray, or it should have a check valve.
    Before beginning, it is a good idea to note the placements of the shower head and control, and to plan the pipe-work involved. In addition, the drainage system to get rid of the waste water will need to be prepared. Both settings of the cable television path and the shower switch will certainly additionally require to be taken into consideration if an immediate or electrical shower system is being installed.
    Make use of the direction overview given with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is necessary to remove the supply of water. In order to safeguard the pipes, they need to be offered a water-proof covering and also fitted with separating shutoffs. The pipelines can then be hidden right into the wall and also glued over to neaten the total look.
    Fit the base tray, shower head, as well as fittings.
    Attach the major shower control to the pipelines that will be supplying the water (This may call for a women screw thread adapter).
    Reconnect the water supply and examination the pipes for any kind of leakages, as some may require tightening up.
    If you are setting up an electrical shower, remember to turn off the electricity supply prior to making any type of electrical links. When these connections have been made (there need to be advice within the instruction manual), the power supply can be switched back on.

    Readjusting Water Stress to Fit Your Shower


    The cold water storage tank can be raised to a higher height (occasionally as low as 150mm (6inches)) by fitting a solid wood support under it - possibly made up of struts as well as blockboards. If you choose this option, the primary as well as distribution pipes will likewise have to be elevated to meet the brand-new height of the tank.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be linked right into the power supply in order to operate.

    Piping as well as Water drainage


    It is best to make use of 15mm diameter supply pipelines, and make the runs to the shower as brief and also straight as possible so regarding maintain optimal pressure and reduce heat loss. Additionally, by reducing the use of arm joints for pipeline edges, you can lower the resistance in the flow of the water system. You can achieve this by bending the pipes rather.

    Most Typical Errors


  • Going against or ignoring regional code constraints.

  • Making use of pipes that are too little.

  • Affixing copper to galvanized without using a brass or dielectric fitting in between both.

  • Not using tape or pipe substance at threaded joints.

  • Uneven your components when mounting them.

  • Not mounting an air gap filling up for fixtures.

  • Reducing supply stub outs also short to install the shutoff valves onto after the completed wall surface remains in location.

  • Not appropriately aligning tubing right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leakage.).

  • When turning the water back on in your house, always run the outside hose pipe valve or flush your toilets to bleed dust and air from the lines. This debris can cause issues in your sink taps as well as other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Freestanding Shower Unit

    I hope you enjoyed reading our post about How to Install a Freestand. Thanks a ton for taking time to read our article post. Sharing is good. You just don't know, you may be helping someone out. Thanks a lot for your time spent reading it.




    Get Quote


    Leave a Reply

    Your email address will not be published. Required fields are marked *